Linux version 2.6.14-1.1653_FC4 (bhcompile@hs20-bc1-7.build.redhat.com) (gcc version 4.0.2 20051125 (Red Hat 4.0.2-8)) #1 Tue Dec 13 21:32:09 EST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6800 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000ffffc00 (ACPI data) BIOS-e820: 000000000ffffc00 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 255MB LOWMEM available. Using x86 segment limits to approximate NX protection On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 DELL ) @ 0x000f71d0 ACPI: RSDT (v001 DELL I 5000 0x06040000 LTP 0x00000000) @ 0x0fffb00f ACPI: FADT (v001 DELL I 5000 0x06040000 PTL 0x00000001) @ 0x0ffffb65 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x0ffffbd9 ACPI: DSDT (v001 DELL I 5000 0x06040000 MSFT 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 20000000 (gap: 10000000:eff80000) Built 1 zonelists Kernel command line: ro root=LABEL=/ rhgb quiet Initializing CPU#0 CPU 0 irqstacks, hard=c03f3000 soft=c03f2000 PID hash table entries: 1024 (order: 10, 16384 bytes) Detected 846.420 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 254540k/262080k available (2098k kernel code, 6896k reserved, 719k data, 172k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1694.12 BogoMIPS (lpj=3388253) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0820) checking if image is initramfs... it is Freeing initrd memory: 1072k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1 PCI: Using configuration type 1 ACPI: Subsystem revision 20050916 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 1000-103f claimed by PIIX4 ACPI PCI quirk: region 1040-105f claimed by PIIX4 SMB PIIX4 devres B PIO at 0158-015f Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 14 15) ACPI: Embedded Controller [EC0] (gpe 9) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: Power Resource [PFN0] (off) ACPI: Power Resource [PFN1] (off) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 4 of device 0000:00:07.1 pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:06: ioport range 0x1040-0x104f has been reserved pnp: 00:06: ioport range 0x3810-0x381f has been reserved pnp: 00:06: ioport range 0x1016-0x103f has been reserved pnp: 00:06: ioport range 0xfe00-0xfefe has been reserved PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: f4000000-f40fffff PREFETCH window: f8000000-fbffffff PCI: Bus 2, cardbus bridge: 0000:00:04.0 IO window: 00001800-000018ff IO window: 00001c00-00001cff PREFETCH window: 20000000-21ffffff MEM window: 22000000-23ffffff PCI: Bus 6, cardbus bridge: 0000:00:04.1 IO window: 00003000-000030ff IO window: 00003400-000034ff PREFETCH window: 24000000-25ffffff MEM window: 26000000-27ffffff ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:04.0 to 64 ACPI: PCI Interrupt 0000:00:04.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:04.1 to 64 Simple Boot Flag at 0x37 set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1136376170.764:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key F03D6A9A83D7F7E9 - User ID: Red Hat, Inc. (Kernel Module GPG key) Limiting direct PCI/PCI transfers. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN0] (on) ACPI: Fan [FAN1] (on) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: Thermal Zone [THRM] (56 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 440BX Chipset. agpgart: AGP aperture is 64M @ 0xe0000000 PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 32 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1080-0x1087, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1088-0x108f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: IBM-DJSA-220, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 39070080 sectors (20003 MB) w/1874KiB Cache, CHS=38760/16/63, UDMA(33) hda: cache flushes not supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.39 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 16384 (order: 6, 327680 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode ACPI wakeup devices: LID COM1 PX42 PWRB ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 172k freed Write protecting the kernel read-only data: 323k kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Synaptics Touchpad, model: 1, fw: 4.3, id: 0x8858a1, caps: 0x0/0x0 input: SynPS/2 Synaptics TouchPad on isa0060/serio1 security: 3 users, 6 roles, 888 types, 109 bools security: 55 classes, 244070 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev hda3, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 es1968: clocking to 48000 piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 5, io base 0x00001060 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:04.0 [1028:00cc] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.0, mfunc 0x01021c72, devctl 0x66 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000020 ACPI: PCI Interrupt 0000:00:04.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Yenta: CardBus bridge found at 0000:00:04.1 [1028:00cc] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:04.1, mfunc 0x01021c72, devctl 0x66 Yenta: ISA IRQ mask 0x0498, PCI irq 11 Socket status: 30000006 PCI: Enabling device 0000:02:00.0 (0000 -> 0003) ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:02:00.0 to 64 eth0: Xircom cardbus revision 3 at irq 11 PCI: Enabling device 0000:02:00.1 (0000 -> 0003) ACPI: PCI Interrupt 0000:02:00.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 ttyS4 at I/O 0x1880 (irq = 11) is a 16550A ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Battery Slot [BAT1] (battery absent) ACPI: Lid Switch [LID] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SBTN] ibm_acpi: ec object not found ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com cdrom: open failed. cdrom: open failed. EXT3 FS on hda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda7, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda2, type ext3), uses xattr kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev hda5, type ext3), uses xattr SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 Disabled Privacy Extensions on device c0380420(lo) IPv6 over IPv4 tunneling driver Adding 521600k swap on /dev/hda6. Priority:-1 extents:1 across:521600k SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0x100-0x4ff: excluding 0x158-0x15f 0x378-0x37f cs: IO port probe 0x100-0x4ff: excluding 0x158-0x15f 0x378-0x37f cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0xa00-0xaff: clean. xircom cardbus adaptor found, registering as eth0, using irq 11 xircom_cb: Link status has changed xircom_cb: Link is 100 mbit SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts eth0: no IPv6 routers present application mixer_applet2 uses obsolete OSS audio interface spurious 8259A interrupt: IRQ7.